• Dn25 2-Way Motorized Control Valve Electric Three Line Control AC 220V Ls′d Tool
  • Dn25 2-Way Motorized Control Valve Electric Three Line Control AC 220V Ls′d Tool
  • Dn25 2-Way Motorized Control Valve Electric Three Line Control AC 220V Ls′d Tool
  • Dn25 2-Way Motorized Control Valve Electric Three Line Control AC 220V Ls′d Tool
  • Dn25 2-Way Motorized Control Valve Electric Three Line Control AC 220V Ls′d Tool
  • Dn25 2-Way Motorized Control Valve Electric Three Line Control AC 220V Ls′d Tool

Dn25 2-Way Motorized Control Valve Electric Three Line Control AC 220V Ls′d Tool

Media: Water
Temperature: Ordinary Temperature
Actuator: Electric
Connection Form: Thread
Type: Direct Acting
Material: Brass
Samples:
US$ 13/Piece 1 Piece(Min.Order)
| Request Sample
Customization:

Contact Supplier

Diamond Member Since 2018

Suppliers with verified business licenses

Manufacturer/Factory & Trading Company

Basic Info.

Model NO.
SKC225
Pressure
Ordinary Pressure
Valve Structure
Direct-Acting Piston Structure
Power Supply
AC Solenoid Valve
Usage
Temperature Control, Flow Control
Standard
GB
Application
Industrial Usage, Water Industrial Usage, Household Usage
Transport Package
1PC/Inner Box, 20PCS/Carton
Specification
1kg/pc
Trademark
Saiko
Origin
Jiangsu
Production Capacity
20000PCS/Month

Product Description

Dn25 2-Way Motorized Control Valve Electric Three Line Control AC 220V 

   The valve is driven by hysteresis synchronous motor with spring return. The valve is normal-closed. When the thermostat is working, it will provide an opening signal, and the motorized valve will be turned on to  to open. Then the chilled/hot water will enter into the coil and supply the cold/hot to the room. When the room temperature rises up to the set point, the thermostat will make the valve power off.  At the same time the valve will be closed by return spring and the water to the coil will be shut off. The room temperature will be kept in the setting range all the time through the opening and closing of the valve.
Dn25 2-Way Motorized Control Valve Electric Three Line Control AC 220V Ls′d Tool

Character of structure
1.Inlay contact switch, the motor is power off after the valve completes open and close, so it has long service life and power saving, but is also safe.
2.The valve body is separated with driver, could be disassembled rapidly.
3.The valve body structure is unique, is allowed of big pressure difference.
4.The driver has manual controller is available for system debugging and maintenance, the manual opening is about 70% (push down the white driving arm to the bottom, and then push inside, when the power is recovered, the valve and driver will return to automatic position)
5.B type driver has inlay relay, one-line control and three-speed switch, realize multi valves parallel, and match with various temperature control switches. (special for four-pipe)
6.Select ordinary driver, one temperature controller matches only one electric vale, or any results caused will be nothing with manufacturer.

Points for installation:
1.Please read this instruction carefully before installation, ask professional to perform installation and connect according to wiring diagram.
2.The electric valve should be installed to the place with certain distance from around articles, but also could be reached by maintenance person. No electric equipments are allowed to install under the valve body, as to avoid leakage and danger. The driver shall be above the valve body horizontally.
3.Clear up the sundries in the pipe before installation, install 50 mu (or thinner) filter in the front end of electric valve.

Technical data

 
Operating voltage 220~240VAC 50/60Hz
Rated power 5W
Nominal pressure 1.6Mpa
Close-off pressure 0.2Mpa
Applied media chilled water,hot water
Stroke range 3mm~5mm


Dn25 2-Way Motorized Control Valve Electric Three Line Control AC 220V Ls′d Tool


Installation diagram
Dn25 2-Way Motorized Control Valve Electric Three Line Control AC 220V Ls′d Tool
Appearance, section and main dimension

Dn25 2-Way Motorized Control Valve Electric Three Line Control AC 220V Ls′d Tool

Dn25 2-Way Motorized Control Valve Electric Three Line Control AC 220V Ls′d Tool
  • We will arrange the delivery once the payment pass risk monitoring. In order to protect both buyers and sellers, we need 8-24 hours to verify the payment.
  • The order will be sent out within 10 working days (excluding weekends and holidays) as soon as your payment is cleared.
  • 1PC/Inner Box, 20PCS/CartonDn25 2-Way Motorized Control Valve Electric Three Line Control AC 220V Ls′d ToolOur commitment to you is to answer your e-mail within 24 hrs, weekend within 48 hrs. Send us an email with any questions or concerns you may have.

Send your message to this supplier

*From:
*To:
avatar Mr. James Zhang
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

You Might Also Like

Contact Supplier

Diamond Member Since 2018

Suppliers with verified business licenses

Manufacturer/Factory & Trading Company
Plant Area
800 square meters
Management System Certification
ISO 9001, ISO 9000, ISO 14001, SA 8000, HACCP, BS 25999-2, BREEAM