Electronic Room Temperature Controller for Fan Coil Units

Customized: Customized
Certification: RoHS, CE
Display Type: LCD
Type: HVAC Systems
Power Supply: 220VAC±10%, 50/60Hz
Set-Point Ran: 5~35ºC
Samples:
US$ 10.9/Piece 1 Piece(Min.Order)
| Request Sample
Customization:

Contact Supplier

Diamond Member Since 2018

Suppliers with verified business licenses

Manufacturer/Factory & Trading Company

Basic Info.

Model NO.
SK303
Sensing Elem
Ntc Sensor
Rated Load
200W
Transport Package
50PCS/CTN(CTN Size: 510*210*320mm)
Specification
86mm x 86mm x13mm
Trademark
Saiko
Origin
Jiangsu
Production Capacity
20000PCS/Month

Product Description

Product Description

Electronic Digital Room Thermostat For Air Conditioning System , White Color

This series of thermostat is running at 24/230 volt with manual changeover from Heat to Cool, it can be used with most heating and cooling systems. This thermostat is powered by the system; batteries are not required because settings are held permanently by non-volatile memory.

Technical Data
Set TEMP range 5-35 ºC Power supply 220VAC±10%,50/60Hz
Accuracy ±1ºC Rated current Max resistive current 3A
Sensor Type NTC sensor Power consumption <2W
Ambient Condition -5-55 ºC Operating Humidity 5~90%RH (no condensing)
Color White Protection Class IP20
Housing Material PC+ABS Flame Retardant plastics Dimension ( W × H × D ) 86*86*14mm
Certificate CE & ISO9001 Hole pitch 60mm (standard)
 

To turn the thermostat on/off

1. The power on and off of the thermostat can be realized through manual operation.

The power on/off condition can be switched through press on/off button.

2. The primary power up of the system is under the power off condition.

To adjust thermostat temperature

1. Press △ or ▽ to adjust the temperature, the flashing default temperature is 20ºC;

2. Press △ to increase temperature by 1ºC;

3. Press ▽ to decrease temperature by 1ºC;

4. The system will exit automatically without any operation in 5 seconds.

Temperature calibration

When the thermostat is in stand by state, press "" for 3 seconds, while display "XX" ºC (RT symbol doesn't show), press "up" or "down" key to adjust the temperature to the correct value, it will accept automatically in 5 seconds.

Heating/Cooling setting

Press "M" key to select heating or cooling mode.

Fan speed setting

With each press of the "fan speed key", the thermostat will change the speed among low, medium, high and auto speed. In Auto" mode, the speed automatically change according to the difference between room temp. and set temp.

To set timer

When the thermostat is turned on, press "" until the time start flashing, using the up or down key to set the desired time. It will accept automatically in 5 seconds. The thermostat is now set to be turned on/off at the desired time.

Writing diagram

Electronic Room Temperature Controller for Fan Coil Units
 

Send your message to this supplier

*From:
*To:
avatar Mr. James Zhang
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

You Might Also Like

Contact Supplier

Diamond Member Since 2018

Suppliers with verified business licenses

Manufacturer/Factory & Trading Company
Plant Area
800 square meters
Management System Certification
ISO 9001, ISO 9000, ISO 14001, SA 8000, HACCP, BS 25999-2, BREEAM